Perfection, what you see is what you get

The new integrated laboratory water purification system, cascade II. I, uses tap water as the source water to prepare 30L / h laboratory grade II pure water, and can obtain grade II pure water and grade I ultra pure water from the flexible or remote water intake handle at a maximum flow rate of 2l / min. The water intake handle can display the water quality and operating conditions in real time. The compact water intake device (chassis is 28 × 28cm) provides customers with real flexible use function, so that users can maximize the use of desktop space, and at the same time, the water intake handle can be placed in the most convenient position for water intake.

► Cascada ll.l Produced laboratory grade II pure water 

Meet or exceed the corresponding water quality specified in various standards, such as ASTM, cap, is03696, CLSI, jisk0577, etc., and reagent grade pure water specified in USP, EP and CHP.

     • Laboratory grade II pure water is suitable for the following more sensitive experimental applications

     • Buffer preparation

     • Preparation of pH standard solution

     • Basic preparation of microbial culture

     • Preparation of chemical reagents for analysis and synthesis

     • Water supply for various instruments

     -Class I ultra pure water system

     -Bottle washing machine

     -Clinical laboratory instruments

     -Sterilizer

► Integrated process control To ensure that cascade II. I system can supply class II pure water in the water tank, the water quality can be maintained through water tank water quality optimization recycling, ultraviolet irradiation sterilization and gas filter, and the secondary pollution of pure water by carbon dioxide, volatile organic compounds, particles and bacteria in the water tank can be avoided as far as possible

► Flexible water intake mode 使With the cascade II. I system, you can use three ways to take level II water: directly from the water intake of the water tank, from the flexible water intake handle on the main engine, and from the remote water intake handle, which is up to 2.9 meters away from the main engine (up to 5.8 meters in series).

     • The real-time water quality data is displayed on the water intake handle and the host monitoring screen at the same time... What you see is what you get

     • The water intake speed of pure water at the water tank faucet is greater than 2L / min, the water intake speed at the flexible and remote water intake handle is from drop by drop to 2L / min, and the peak water consumption is greater than 120L / h

     • The water intake handle can fully perform the conventional system control functions, including the "print report" meeting the requirements of GLP specification, thus meeting the requirements of optimal utilization of desktop space. For example, the main system, prefilter module and water tank can all be placed under the experimental platform

Cascadall

.丨产出的实验室I级超纯水达到或超过各种标准中规定的丨级水质，如ASTM、CAP、IS03696、CLSI、 JISK0577等，及USP、EP和ChP中规定的试剂级超纯水要求实验室丨级水适用于以下关键实验室应用：•化学仪器分析：HPLC、UPLC、AA、ICP、LC-MS、GC-MS、ICP-MS和1C、电化学、痕量分析、颗粒计数、总有机碳（TOC)检测 •生物仪器分析：PCR、DNA测序、电泳 •动物和植物细胞培养、分子生物学、单抗制品相关应用► 多种终端过滤器可供选择满足您多种应用要求• 0.2pm除菌过滤器一去除细菌和颗粒物• 0.1pm终端过滤器一去除绝大部分顆粒物和支原体•正电荷吸附终端过滤器一去除RNASE、DNASE、PROTEASE和内番素► 灵活的取水方式使用Cascadall.l系统，您可以直接从主机上的灵活取水手柄���用I级水，也同样可从两个額外的 远程取水手柄取水，其最远放置距离达到2.9米（串联可达5.8米）。每个取水手柄都放置在支架上，并由0.8米自 由使用距离•电阻率和TOC数据被实时监测，并显示在您的“手中”...所见即所得 •取水揆式：-多种预设恒定流速：从逐滴至2.0L/min -定呈取水（最大至90L)•取水手柄可充分执行常规系统控制功能，包括满足GLP规范要求的“打印报告”，进而满足了桌面空间最优化 利用的要求，例如主系统、预过滤模块和水箱可全部放買在实验台下面

► Cascadall.丨Grade I ultra pure water produced in laboratory Meet or exceed the requirements of grade I water quality specified in various standards, such as ASTM, cap, is03696, CLSI, jisk0577, etc., and the requirements of reagent grade ultra pure water specified in USP, EP and CHP.

Laboratory grade I water is suitable for the following key laboratory applications:

     • Chemical instrument analysis: HPLC, UPLC, AA, ICP, LC-MS, GC-MS, ICP-MS and 1C, electrochemistry, trace analysis, particle count, total organic carbon (TOC) detection

     • Biological instrument analysis: PCR, DNA sequencing, electrophoresis

     • Application of animal and plant cell culture, molecular biology and monoclonal antibody products

► A variety of terminal filters are available Meet your application requirements

     • 0.2pm sterilization filter to remove bacteria and particles

     • The 0.1pm terminal filter can remove most of particulate matter and mycoplasma

     • Removal of RNase, DNase, protease and endotoxin by positive charge adsorption terminal filter

► Flexible water intake mode With the cascade LL. L system, you can take grade I water directly from the flexible water intake handle on the host, as well as from two additional remote water intake handles, which can be placed as far as 2.9 meters (up to 5.8 meters in series). Each water intake handle is placed on the support, and the free use distance is 0.8m

      • Resistivity and TOC data are monitored in real time and displayed in your "hands"... What you see is what you get

      • Water intake mode：      

       -Various preset constant flow rates: from drop by drop to 2.0 L / min

       -Fixed water intake (up to 90L)

The water intake handle can fully perform the conventional system control functions, including the "print report" meeting the requirements of GLP specification, thus meeting the requirements of optimal utilization of desktop space. For example, the main system, prefilter module and water tank can all be placed under the test bench

Perfect every step to experience the maximum degree of purification

The water purification system of cascade III. I laboratory adopts the most advanced technology platform to meet your unique water source conditions, application requirements and functional requirements. The system maximizes the purification capacity of each stage, so that high quality pure water and ultra pure water can be obtained stably. In addition, the unique system detection and leakage protection function can make you more confident about the safety of laboratory water supply

集成化预过滤模块► 通过控制进水压力和监测流速优化系统运行。增压泵 为可选配置►  3.2英寸屏幕以彩色图标显示每个组件的运行状态 ► 根据当地自来水水质选择滤芯 •淤泥密度指数（SDI>•氯含量 •微生物► 过滤柱附有1C芯片确保安装和操作正确 ► 滤柱更换便捷

Integrated prefilter module

► The operation of the system is optimized by controlling the inlet pressure and monitoring the flow rate. Booster pump is optional

► The 3.2-inch screen displays the operation status of each component with color icons

► Choose filter element according to local tap water quality

• silt density index (SDI)

• chlorine content

• microorganisms

The filter column is attached with 1C chip to ensure correct installation and operation

The filter column is easy to replace

Integrated reverse osmosis technology

► The two-stage reverse osmosis technology ensures high quality and stable water production. When the influent conductivity reaches 2000 μ s / cm, the typical value of water production is 5 μ s / cm

► The excellent reverse osmosis purification ability can effectively prolong the use of subsequent deionization column and terminal filter

Integrated water tank

► The function information such as the irradiation time of the water tank ultraviolet lamp, the water quality recycling and the conductivity level are integrated into the main system

► Water tank air filters reduce environmental pollution, such as carbon dioxide, particulate matter, bacteria and volatile organic compounds

► The dual liquid level sensor device provides additional security for the system. The independent high liquid level sensing control realizes the protection of abnormal ultra-high liquid level (110%), and cooperates with the whole process liquid level sensing to realize the protection of normal high liquid level (100%) and low liquid level (10%) ultra pure aquatic water

Integrated water purification technology

► The corresponding deionization column (with IC chip) can be selected for different experimental application requirements

• Standard high capacity refining column - suitable for conventional ultra pure water black process

• Low TOC column is suitable for high sensitivity analysis

• Low boron column is suitable for ICP analysis

► The UV gasification unit provides effective organic oxidation control to help the water quality recover quickly when the system is restarted

► Total organic carbon (TOC) monitoring technology provides real-time water quality data integrated system control

► The conductivity, pressure and flow rate can be monitored in up to 6 stages

► The system status is visualized in the form of graphics and color icons

► Automatic disinfection procedure to report the thorough disinfection effect of the system

► A variety of data management options including RS232 and SD card

Integrated water leakage protection device

► The unique design of the bottom plate directs the possible water leakage at different locations to the drain. The water leakage sensor at the dry drain can sensitively detect the slight water leakage with a height of close to 1 mm

► The water leakage protection sensor is also equipped in the water pre filtration module

Perfect fingertip touch intelligent system

Cascada III.I The laboratory water purification system can intelligently select and display the information you need for effective operation. Equipped with 7-inch touch screen, using icon and color code display, user-friendly human-computer interaction. When necessary, unconventional functions such as system maintenance, system startup and historical data tracing can be easily completed.

► General operation interface 

    • The operation parameters are fully displayed, which can be known as soon as possible

    • Two kinds of produced water quality data: conductivity / resistivity, TOC, produced water temperature and water intake speed

    • Water tank level

    • Online alarm

► 7-inch touch screen 

    • Provide a friendly and comfortable experience

    • Touch" mode of smart phones to encourage new users to operate easily

    • Color code (red, amber, blue) and flashing prompt are provided to indicate "unconventional behavior" and corresponding emergency / danger status

    •Uunparalleled manipulation of "width" and "depth"

► Multilingual support Chinese, English, Japanese or Korean can be selected according to user preferences

► Monitoring interface To provide a scientific basis for the management of consumables replacement 

    • flow and pressure monitoring

    • Use time

    • Water quality monitoring

► All consumables status in one screen

► Red, amber and blue indicators will participate in the report at two levels

    • There is a problem with a single module

    • The background color of the whole system changes in case of emergency

Next:No Content!

Previous:No Content!